Licensed Insured Precision
Florida's Trusted Concrete Core Drilling Specialists
Logos Concrete Solutions delivers clean, precise concrete core drilling and hole drilling for contractors, facilities and homeowners. Based in Central Florida and ready to travel to any job site in the state, we drill the holes your plumbing, electrical, HVAC and structural work depends on — on schedule, with minimal dust and disruption.
- Clean, precise holes through floors, walls & overhead
- Wet, low-dust drilling with clean-up included
- Statewide service — from Pensacola to Miami
Request Core Drilling Services
We aim to respond within one business day
Thank you — request received!
We aim to reach out within one business day. Need it sooner? Call 352-345-1888.
- Licensed & Insured
- Fast Response
- Clean, Precise Holes
- Statewide Service
- Wet-Drilling Dust Control
- Clean Job Sites
What we do
Complete Concrete Core Drilling Services
Core drilling is all we do. From a single plumbing penetration to a full commercial build-out, we bring the right diamond tooling and the same careful precision to every hole — through floors, walls and overhead.
Our SpecialtyConcrete Core Drilling
Our specialty: clean, round, diamond-cored holes through slabs, walls, block, brick and decks — for every trade.
Learn more
Vertical Core Drilling
Plumb floor and slab penetrations for plumbing, drains, risers and conduit — with water capture that protects the floor below.
Learn more
Horizontal & Angled Drilling
Level, sloped or angled cores through walls, foundations and beams for pipe, duct, vent and utility runs.
Learn more
Why Logos Concrete Solutions
Precision You Can Build On
We're a dedicated concrete core drilling company — not a general contractor who drills on the side. That focus means sharper tooling, cleaner holes and crews who know how to protect your schedule, your structure and your finished spaces.
Every job starts with careful layout and coordination with you or your GC to confirm locations are clear of post-tension cables and utilities — we're happy to work with your scanning provider. We wet-drill to control silica dust, capture slurry, remove cores and leave the area clean for the next trade. Our goal is simple: show up when we say we will and put every hole exactly where it belongs.
Faith-driven work. Logos Concrete Solutions is an Orthodox Christian business. We work for the glory of God alone — that's why we hold ourselves to honest pricing and careful craftsmanship, and why we respectfully decline projects that go against our values. Our faith & values →
The LCS standard
Built on Safety, Precision & Respect
The same habits on every job, whether it's an occupied hospital, a new warehouse or a homeowner's garage.
Safety First
Trained operators, proper PPE, wet-drilling silica control and careful coordination on embedded utilities before we drill. We protect people, structure and your site.
Clean, Precise Results
Diamond core bits produce smooth, round, accurately placed holes — plumb, level or at the exact angle you need — with no spalling or hammer damage.
Minimal Disruption
Low-vibration, low-noise methods, water capture and full clean-up. Night and weekend scheduling available for occupied and sensitive sites.
Typical applications
Holes & Openings for Every Trade
We work alongside plumbers, electricians, mechanical contractors, GCs and facility teams on new construction, renovations and retrofits.
Plumbing
Floor drains, waste & supply lines, cleanouts, sleeves and riser penetrations.
Electrical
Conduit runs, feeder penetrations, floor boxes, grounding and low-voltage paths.
HVAC
Duct, refrigerant line-set, condensate and exhaust openings through slabs and walls.
Anchor Holes
Holes for anchor bolts, dowels, handrails and equipment mounts — drilled to spec for your crew to set.
Utilities
Water, gas, telecom and fiber entries through foundations, vaults and manholes.
Drainage
Scuppers, roof drains, weep holes, stormwater and pool & deck drainage.
Fire Protection
Sprinkler mains and branch line penetrations, firestop-ready sleeves.
Testing & Sampling
Core samples for compressive-strength testing and slab-thickness verification.
Got questions?
Frequently Asked Questions
Quick answers about core drilling with Logos Concrete Solutions.
What areas of Florida do you serve?
We're based in Central Florida and we travel statewide. Our core area includes Marion, Lake, Sumter, Citrus, Alachua, Orange, Seminole, Osceola, Polk, Hillsborough, Pasco, Hernando and Volusia counties, and we mobilize to the Panhandle, North Florida, the Space Coast, Southwest Florida and South Florida. If your project is in Florida, we can get there.
Are you licensed and insured?
Yes. Logos Concrete Solutions is licensed and insured, and license and insurance documentation is provided upon request — just ask when you request your quote.
Can you drill the size hole I need?
Tell us the size and location of the opening you need and we'll confirm the right setup when you request a quote.
How clean and accurate are your holes?
Diamond core drilling produces a smooth, perfectly round hole with no spalling, no hammering and no micro-fractures in the surrounding concrete. We set up on layout marks or a template, anchor or vacuum-mount the rig, and drill true to plumb or to the exact angle you specify.
Do you control dust and water?
Yes. We wet-drill to keep silica dust down and capture slurry with vacuums, water rings and containment so finished floors, occupied spaces and electrical rooms stay clean. Dry-coring with vacuum extraction is available where water isn't allowed.
What about rebar, post-tension cables and buried utilities?
Before we drill, we coordinate with you or your GC to confirm hole locations are clear of post-tension cables, conduit and other embedded utilities. We don't perform scanning ourselves, but we're glad to work alongside your scanning provider and drill to their marked layout. Diamond core bits drill through ordinary rebar cleanly; when specific bars must be avoided, we adjust locations with your engineer's approval.
Let's talk
Start Your Project Today
Call, text or send a request — we aim to respond within one business day with clear answers and a straightforward quote.
Phone
Based In
Central Florida
Serving all of Florida
When to Call
Call anytime — leave a message and we'll call you back.
Our service area
Central Florida Based. Statewide Service.
Our home base is Central Florida, where we serve commercial, industrial and residential customers. For projects anywhere else in the state, we mobilize fully equipped crews — from the Panhandle to the Keys.
Core Central Florida counties:
- Marion
- Lake
- Sumter
- Citrus
- Alachua
- Levy
- Hernando
- Pasco
- Orange
- Seminole
- Osceola
- Polk
- Hillsborough
- Volusia
- Brevard
Statewide: Tampa Bay, Orlando, Jacksonville, Gainesville, Tallahassee, Pensacola, Daytona, the Space Coast, Sarasota, Fort Myers, Naples, West Palm Beach, Fort Lauderdale, Miami and everywhere in between.
Explore Service AreasFree, no-obligation quotes
Ready to Get Your Holes Drilled Right?
Tell us the size, quantity and location — we'll get you a clear quote fast. Central Florida based, serving the entire state.